Turn Signal Lever - Toyota Land Cruiser 200 2018 Manual

Turn signal lever

Operating instructions
The turn signal lever can be used to show the following intentions of
the driver:
1
Right turn
2
Lane change to the right (push
and hold the lever partway)
The right hand signals will flash
until you release the lever.
3
Lane change to the left (push
and hold the lever partway)
The left hand signals will flash until
you release the lever.
4
Left turn
■
Turn signals can be operated when
The engine switch is in IGNITION ON mode.
■
If the indicator flashes faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
LC200_OM_OM60Q26U_(U)
4-2. Driving procedures
211
4