Table of Contents
Advertisement
466
6-3. Do-it-yourself maintenance
Power steering fluid
■
Fluid level
The fluid level should be within the appropriate range.
1
Full (when hot)
2
Add fluid (when hot)
3
Full (when cold)
4
Add fluid (when cold)
Hot:
The vehicles has been driven around 50 mph (80 km/h) for
20 minutes, or slightly longer in frigid temperatures.
(Fluid temperature, 140°F - 175°F [60°C - 80°C]).
Cold: The engine has not been run for about 5 hours.
(Room temperature, 50°F - 85°F [10°C - 30°C]).
■
Checking the fluid level
Make sure to check the fluid type and prepare the necessary items.
Fluid type
Items
1
Clean all dirt off the reservoir.
2
Remove the cap by turning it counterclockwise.
3
Wipe the dipstick clean.
4
Reinstall the cap and remove it again.
5
Check the fluid level.
LC200_OM_OM60Q26U_(U)
Automatic transmission fluid DEXRON
Rag or paper, clean funnel (only for adding fluid)
®
II or III
Advertisement
Table of Contents
