Toyota Land Cruiser 200 2018 Manual page 111

■
Setting and canceling the functions
To switch between setting and canceling, follow the procedure
below:
1
Close all the doors and turn the engine switch to IGNITION ON
mode. (Perform step
2
Shift the shift lever to P or N,
and press and hold the door
lock switch (
approximately 5 seconds and
then release.
The shift lever and switch posi-
tions corresponding
desired function to be set are
shown in the following table.
Use the same procedure to cancel the function.
Shift position linked door locking
function
Shift position linked door unlock-
ing function
Speed linked door locking func-
tion
Driver's door linked door unlocking
function
When the setting or canceling operation is complete, all the doors
are locked and then unlocked.
LC200_OM_OM60Q26U_(U)
3-2. Opening, closing and locking the doors
within 20 seconds.)
2
or ) for
to the
Function
Door lock switch
Shift lever position
P
N
111
3
position