Table of Contents
Advertisement
■
When the window cannot be opened or closed
When the jam protection function or catch protection function operates
unusually and the door window cannot be opened or closed, perform the fol-
lowing operations with the power window switch of that door.
●
Stop the vehicle. With the engine switch in IGNITION ON mode, within 4
seconds of the jam protection function or catch protection function activat-
ing, continuously operate the power window switch in the one-touch closing
direction or one-touch opening direction so that the door window can be
opened and closed.
●
If the door window cannot be opened and closed even when performing the
above operations, perform the following procedure for function initialization.
1
Turn the engine switch to IGNITION ON mode.
2
Pull and hold the power window switch in the one-touch closing direction
and completely close the door window.
3
Release the power window switch for a moment, resume pulling the
switch in the one-touch closing direction, and hold it there for approxi-
mately 6 seconds or more.
4
Press and hold the power window switch in the one-touch opening direc-
tion. After the door window is completely opened, continue holding the
switch for an additional 1 second or more.
5
Release the power window switch for a moment, resume pushing the
switch in the one-touch opening direction, and hold it there for approxi-
mately 4 seconds or more.
6
Pull and hold the power window switch in the one-touch closing direction
again. After the door window is completely closed, continue holding the
switch for a further 1 second or more.
If you release the switch while the window is moving, start again from the
beginning.
If the window reverses and cannot be fully closed or opened, have the vehicle
inspected by your Toyota dealer.
■
Door lock linked window operation
●
The power windows can be opened and closed using the mechanical key.
(→P. 548)
●
The power windows can be opened using the wireless remote control.
(→P. 106)
*
: The settings must be customized at your Toyota dealer.
■
Power windows open warning buzzer
The buzzer sounds and a message is shown on the multi-information display
in the instrument cluster when the engine switch is turned off and the driver's
door is opened with the power windows open.
■
Customization
Settings (e.g. linked door lock operation) can be changed.
(Customizable features: →P. 582)
LC200_OM_OM60Q26U_(U)
3-5. Opening, closing the windows and moon roof
159
3
*
*
Advertisement
Table of Contents
