Erasing the entire HomeLink
Press and hold the 2 outside but-
tons for 10 seconds until the
®
HomeLink
changes from continuously lit
(orange)
to
(green).
If you sell your vehicle, be sure to
erase the programs stored in the
®
HomeLink
■
Codes stored in the HomeLink
●
The registered codes are not erased even if the battery cable is discon-
nected.
●
If learning failed when registering a different code to a HomeLink
that already has a code registered to it, the already registered code will not
be erased.
■
Before programming
●
Install a new battery in the transmitter.
●
The battery side of the transmitter must be pointed away from the
HomeLink
■
Certification for the garage door opener
■
When support is necessary
Visit on the web at www.homelink.com/toyota or call 1-800-355-3515.
LC200_OM_OM60Q26U_(U)
5-4. Using the other interior features
®
memory (all three codes)
indicator
light
rapidly
flashing
memory.
®
memory
.
433
®
button
5