Table of Contents
Advertisement
200
4-2. Driving procedures
Stopping the engine
1
Stop the vehicle.
2
Set the parking brake (→P. 212), and shift the shift lever to P.
3
Press the engine switch.
4
Release the brake pedal and check that the display on the instru-
ment cluster is off.
Changing engine switch modes
Modes can be changed by pressing the engine switch with brake
pedal released. (The mode changes each time the switch is pressed.)
*
1
Off
The emergency flashers can be
used.
2
ACCESSORY mode
Some electrical components such
as the audio system can be used.
"ACCESSORY" will be displayed
on the multi-information display.
3
IGNITION ON mode
All electrical components can be
used.
"IGNITION ON" will be displayed
on the multi-information display.
*
: If the shift lever is in a position
other than P when turning off the
engine, the engine switch will be
turned to ACCESSORY mode, not
to OFF.
LC200_OM_OM60Q26U_(U)
Advertisement
Table of Contents
