DAPAudio PA90CDT V3 Manual page 13

7. Repeat/ Random play
1. Press the Repeat/ Random button once to repeat the current track.
2. Press the Repeat/ Random button again to repeat the whole disc.
3. Press the Repeat/ Random button again to start random play.
4. Press the Repeat/ Random button a fourth time, to exit the Repeat/ Random Mode.
8. Scanning (Fast forward/Fast backward)
• Scanning is a function for moving quickly forward or backward when either the
pressed and hold down.
• Press and hold down the
is not audible. The current scan point is indicated on the LCD.
• Press and hold down the
is not audible. The current scan point is indicated on the LCD.
9. Switching between CD/ USB playback
1. Insert a USB stick.
2. Press the CD/USB button.
Now the display will briefly show USB and then proceed in playback mode.
During playback the display will switch continuously between the current track and the current folder
as shown below.
If you try to select USB mode without a USB stick in the USB port, the display will look as the figure
below.
button to begin scanning. The disc moves rapidly forward and the sound
button to begin scanning. The disc moves rapidly forward and the sound
11
or the is