Lantronix xPico 240 Quick Start Manual page 2

xPico 240 Quick Start Guide
xPico
®
®
3. CONNECT TO WEB MANAGEMENT CONSOLE
The steps below outline how to access the web management console to begin configuring the xPico
xPico 240 XXX-XXX
Network 1
Network 2
Network 3
Network 4
3a. Connect to the network using the unique xPico 240 SSID.
This number refers to the last 6 digits of the serial number
printed on the module. See highlighted section. The default
password for this Wi-Fi Soft AP is PASSWORD (case sensitive).
4. INITIAL CONFIGURATION
4a. Once logged in, click the Quick Connect menu to
continue with the configuration of the xPico 240 and
connect to the Wi-Fi network.
5. COMPLETE THE CONFIGURATION
Continue with the rest of the unit configuration using the Web Managment Interface (UI). Context-sensitive help is available in-line
within the Web UI. The unit can also be configured using the Command Line Interface (CLI). The CLI is accessible via the serial port. For
detailed instructions, please refer to the xPico 200 Series User Guide:
docs.lantronix.com/products/xpico-200/
KEEP YOUR DEVICE SECURE. Please change the default Soft AP SSID password and administrator password before
!
proceeding further. From the "Network" menu in the Web UI, follow this path: ap0
password. Click OK to apply these new settings. Next, from the "User" menu in the Web UI, select admin user and enter a
new password. Click OK to apply these new settings. Reboot and continue with the rest of the configuration.
TECHNICAL SUPPORT
For technical support queries, visit
support or call (800) 422-7044 Monday – Friday from
6:00 a.m. – 5:00 p.m., Pacific Time, excluding holidays.
©2017 Lantronix, Inc. All rights reserved. Lantronix and xPico are registered trademarks of Lantronix, Inc. All other trademarks are the property of their respective owners. Specification are subject to
change without notice. 900-800-R Rev B
240 Quick Start Guide
http://www.lantronix.com/
192.168.0.1
Username
Password
3b. Connect to 192.168.0.1 using your web browser. The
default USER ID = admin and PASSWORD = PASSWORD
(both case sensitive).
4b. On the Quick Connect Page, the wireless client interface
can be configured. The xPico 240 can now connect to a
network from the list of available wireless networks.
LATEST FIRMWARE
For the latest firmware downloads,
visit http://www.lantronix.com/support/downloads
240 gateway.
Link Configuration to set the AP