Adding Salt - Grundig GSF 41820 B User Instructions

Preparation
C
If you move your house, it is
necessary to readjust water
hardness level of your machine
by considering the information
given above according to the
hardness level of the supply
water in your new location. Your
machine will display the most
recently adjusted water hardness
level.

Adding salt

Water softening system needs to be
regenerated in order that the product
operates with the same performance
continuously. Dishwasher salt is used for this
purpose.
C
Use only special softening salts
produced particularly for the
dishwashers in your machine.
C
We recommend using granular
or powder softening salts. Do
not use salts that are insoluble
in water such as table salt or
common salt. Performance of
water softening system may get
worse in time.
C
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening salt
before starting the machine.
1. First take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid counter
clockwise to open it (A, B).
14 /40 EN
C
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening salt
before starting the machine.
C
Before initial use, fill the water
softening system with 1 litre of
water (C).
3. Fill the salt reservoir with salt by using
salt funnel (D). To speed up dissolution
rate of salt in water, stir it with a spoon.
DISHWASHER / USER INSTRUCTIONS