Page 1
DISHWASHER USER INSTRUCTIONS GDF 5302 S GDF 5302 www.grundig.com...
Page 2
DISHWASHER USER INSTRUCTIONS GDF 5302 S GDF 5302...
Page 3
Please read this user manual first! Dear Customer, Thank you for preferring a Grundig product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
CONTENTS 1 INSTRUCTIONS FOR SAFETY 5 OPERATING THE AND ENVIRONMENT PRODUCT Keys ...............23 General safety ..........4 Intended use ........... 4 Preparing the machine ........23 Children’s safety ..........5 Programme selection ........23 Disposing of packaging material ....5 Auxiliary functions ........25 Transportation of the product .......
INSTRUCTIONS FOR SAFETY AND ENVIRONMENT This section contains safety wet hands! Never unplug by pulling on the cable, always instructions that will help to get pull out by grabbing the plug. protected from risk of personal • The product must be injury or property damage.
instructions for safety and environment to be used in household and of the product when leaving similar applications such as: the room where it is located. • Store all detergents and - Staff kitchen areas in shops, additives in a safe place away offices and other working from the reach of the children.
instructions for safety and environment Compliance with WEEE Directive and Disposing of the Waste Product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
INSTALLATION Refer to the nearest Authorised Service capacity! The product must be installed on a flat surface in order for the door to Agent for installation of your product. To be closed comfortably and securely. make the product ready for use, make sure •...
Installation on the new product. Use the new water Connection to the drain inlet hose supplied with the product. Water discharge hose can directly be • Connect the water inlet hose directly connected to the drain hole or sink’s to the water tap. Pressure coming from drainage.
Installation Damaged power cables must Adjusting the feet be replaced by the Authorised If the door of the product cannot be closed Service Agent. properly or if the product swings when you push it slightly, then you need to adjust If your dishwasher is equipped the feet of the product.
PREPARATION Tips for energy saving After determining hardness level of the supply water: Following information will help you use the 1. Turn on the machine, press and hold Time product in an ecological and energy-efficient Delay and Programme keys simultaneously manner.
Page 14
Preparation Water hardness level adjustment table Hardness English Water German Water French Water Water Hardness Level Indicator Level Hardness °dE Hardness °dH Hardness °dF 0th Level Press the Time Delay key to switch the water hardness level to position P1. 1st Level 9-13 2nd Level...
Preparation If you move your house, it is necessary to readjust water hardness level of your machine by considering the information given above according to the hardness level of the supply water in your new location. Your machine will display the most recently adjusted water hardness level.
Preparation Since different salt brands in the market have different particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours. Therefore, Salt Indicator remains on for a 2. Put suggested amount of powder, liquid/ while after adding salt into the gel or tablet detergent in the reservoir.
Preparation The best washing performance in dishwashers is obtained by using detergent, rinse aid and water softening salt individually. Observe the instructions of the detergent manufacturer on the package when using tablet detergents. Contact the detergent manufacturer if your dishes Use powder or liquid/gel are wet and/or if you notice limescale spots particularly on...
Preparation 4. If there are stains on tableware items The rinse aid used in dishwashers after washing, level must be increased is a special combination and if there is a blue trace after wiping that aims to increase drying them by hand, it must be decreased. This efficiency and prevent water is set to position 3 as factory default.
Preparation Placing the dishes into the dishwasher You can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way. • Wipe away any coarse food remnants (bones, seeds, etc.) on the dishes before placing them in the dishwasher.
Page 20
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware DISHWASHER / USER INSTRUCTIONS 19 / 37 EN...
Preparation Upper basket height Collapsible lower basket tines adjustable rack There are foldable tines (A) located at the Use the lower and upper parts of the height lower basket of the machine are designed adjustable racks in the upper basket of for an easier placement of large pieces such the machine by sliding them down or up as pans, bowls, etc.
Preparation Cutlery basket Upper basket multipurpose service rack Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an This accessory located at the upper basket efficient manner. of your machine allows you to easily wash Since the cutlery basket can be moved (A, pieces such as extra long ladles and bread B), you can create more space while placing...
Operating the product Keys Programme selection On/Off key 1. Press On/Off key to turn on your It is used to turn on or off the machine. machine. Machine will turn on with economy 2. Refer to the table of "Programme data programme in On mode and the number of and average consumption values"...
Page 25
Operating the product /37 EN DISHWASHER / USER INSTRUCTIONS...
Operating the product Auxiliary functions selection indicator and on the display. 4. Start the programme by pressing Start / Washing programmes of your dishwasher Pause / Cancel key. are designed to obtain the best cleaning effect, considering the type of the soiling, soiling degree and properties of the dishes With the Half Load function you to be washed.
Operating the product Interior Lighting While the Time Delay is active (Depends on the model) the relevant delay period and Some models have interior lighting to start icon will be displayed illuminate the interior when the door is steadily. For 0-3 hours time delay opened.
Operating the product Starting the programme Cancelling the programme To start your machine after selecting the 1. Press Start/Pause/Cancel key for 3 programme and auxiliary functions, press seconds to cancel the programme. Start/Pause/Cancel key. 2. Release the key when the programme Your machine performs water indicator starts flashing.
Operating the product 2. Press P key until the drying indicator Water cut-off warning starts flashing If mains water is cut or water inlet tap is 3. Set to the appropriate level with the turned off the machine cannot take water Time Delay key.
MAINTENANCE AND CLEANING Service life of the product extends and Cleaning the filters frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller.
TROUBLESHOOTING Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 34
Troubleshooting • Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no water will accumulate in them. • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary.
Page 35
Troubleshooting adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme.
Page 36
Troubleshooting corroded item can migrate to other stainless steel surfaces and cause corrosion on those surfaces as well. Such items should not be washed in dishwashers. Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent.
Page 37
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
Need help?
Do you have a question about the GDF 5302 S and is the answer not in the manual?
Questions and answers