Page 1
DISHWASHER USER INSTRUCTIONS GNF 51030 W www.grundig.com...
Page 2
DISHWASHER USER INSTRUCTIONS GNF 51030 W...
Page 3
Please read this user manual first! Dear Customer, Thank you for preferring a Grundig product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
INSTRUCTIONS FOR SAFETY AND ENVIRONMENT This section contains safety • Never touch the plug with wet hands! Never unplug by instructions that will help to give pulling on the cable, always protection from risk of personal pull out by grabbing the plug. injury or property damage.
Instructions for safety and envIronment - Staff kitchen areas in shops, Disposing of packaging offices and other working material environments. Packaging materials are • Only dishwasher safe dangerous to children. Keep detergents, rinse aids and packaging materials in a safe additives must be used.
Instructions for safety and envIronment Compliance with WEEE Directive and Disposing of the Waste Product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
INSTALLATION • To make the product ready for use, make Place the product on a rigid floor. Do not place it on a long pile rug or similar sure that the electricity, tap water supply and surfaces. water drainage systems are appropriate before calling the Authorised Service Agent.
Installation to the drainpipe without bending it. Tightly WaterProtect+ fix the water discharge hose to the drainpipe The WaterProtect+ system protects against in order to prevent any dislocation of the water leaks that may occur at the hose inlet. water discharge hose during operation of Water contact with the valve box of the the product.
Installation terminal in the plug marked ‘L’ or This appliance must be coloured red. earthed Green and yellow If the fitted moulded plug is not or green suitable for your socket, then the plug should be cut off and an appropriate plug fitted.
PREPARATION Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy-efficient Cleaning, rinsing and drying performance manner. of your dishwasher will increase when water Wipe away any coarse food remnants on softening system is adjusted properly.
Preparation .min 1 Second 1 Minute 1 Remove the test Turn on the tap and Hold the test strip in Remove the test .Wait for 1 minute The test strip shows strip from the let the water run for the water for about strip from the water you the hardness .packet...
Preparation If your machine is equipped with “Automatic Water Hardness Detection System”, water hardness adjustment will be made by the service/user as standard during first installation. If you move your house, your machine will automatically perform water hardness level adjustment according to the water hardness in the new place you have moved in.
Preparation Only use in the detergents produced particularly for use with dishwashers. Never use washing up liquids. We recommend you not to use detergents that contain chlorine and phosphate as they are harmful for the environment. Adding detergent You can put about 2 kg of You can find the correct amount softening salt into the salt of detergent for the selected...
Preparation 2. Put suggested amount of powder, liquid/ Use powder detergent in short gel or tablet detergent in the dispenser. programmes without prewash since the solubility of the tablet detergent changes depending on the temperature and time. Excessive usage of powder detergents will cause the detergent not dissolve completely and will also cause...
Preparation When you switch to powder, liquid/ gel or tablet detergent from a combined tablet detergent: 1. Make sure that salt and rinse aid reservoirs are full. 2. Set the water hardness to the highest level and perform an empty run. 3.
Preparation Items not suitable for washing and smaller, delicate and light items in the upper basket. in the dishwasher • Place the hollowed dishes such as • Never wash dishes soiled by cigarette bowls, glasses and pans upside down ash, candle remnants, polish, dyestuff, in the dishwasher.
Page 20
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware DISHWASHER / USER INSTRUCTIONS 19 / 48 EN...
Preparation Cutlery basket Grab one of the upper basket wires (right or left) and lift it up (A). Cutlery basket is designed to wash your Repeat the same process to raise the other dishes such as knife, fork, spoon, etc. in an side of the basket.
Preparation Collapsible upper basket tines Upper basket height adjustable rack There are foldable tines on the upper basket of the machine that you can lay down when Use the lower and upper parts of the height you need larger space for big dishes. On adjustable racks in the upper basket of your upper basket there are two types of the machine by sliding them down or up...
Preparation Collapsible lower basket tines Bringing the tines to the horizontal position by holding There are foldable tines (A) located at the them from the tips may cause lower basket of the machine are designed them to bend. Therefore, it will for an easier placement of large pieces such be appropriate to bring the tines as pans, bowls, etc.
Preparation Upper cutlery basket The upper cutlery basket is designed for small dishes, or long items that cannot fit into the lower cutlery basket. After taking out the basket by lifting it up, remove the carrier part from the rails by pulling it towards yourself (C).
OPERATING THE PRODUCT 1. On / Off key 2. Programme Selection keys 3. Function keys Tablet detergent function Express Function c) Child Lock / Steam Shine Function d) Settings Menu / TrayMasterFunction 4. Time Delay key 5. Start / Pause / Cancel key 6.
Operating the product Keys 4. Place the dishes in accordance with the instructions in the user manual. On / Off key 5. Make sure that the upper and lower It is used to turn on or off the machine. impellers rotate freely. Press the On / Off key for 1 second to turn on.
Page 27
Operating the product /48 EN DISHWASHER / USER INSTRUCTIONS...
Operating the product Auxiliary functions Express Function It shortens the time of the washing cycle Washing programmes of your dishwasher selected and decreases water consumption are designed to obtain the best cleaning by enabling washing under higher pressure. effect, considering the type of the soil, soiling degree and properties of the dishes to be Active Self Cleaning Filter washed.
Operating the product Programming the washing When you press the key without time canceling the Time Delay function, “Time Delay On” Time Delay warning will be displayed. If an economical electricity tariff is applied in your region, you can use the Time To cancel the Time Delay function Delay function to wash your dishes during 1.
Operating the product Your machine performs water The machine will remain silent softening depending on the in pause mode for some time hardness level of the supply in order to remove the water in water. Remaining time displayed the machine and on the dishes towards the end in some completely and to have the programmes can be different...
Operating the product Changing the auxiliary function At the end of the programme or if no programme is started, in To change the auxiliary functions after starting order to provide energy saving the programme, you should cancel the the machine is automatically programme in the first place.
Page 32
Operating the product 6. Press either one of function key (c) or 3. A little limy function key (a) to store the changes 4. Mediocre limy made in the "Language" setting or in 5. Limy the " Factory Settings?" menu. Following 6.
Page 33
Operating the product function. It is set to “Off” at the factory. (This again after entering in the "Settings menu". Volume setting feature may not be available depending on the model you have purchased.) Select one of the following levels for the Doormatic Volume setting: When you enable this function, the door of...
Operating the product Factory Settings? Rinse Aid indicator ( ) Proceed as indicated below to cancel all Please check the rinse aid indicator on the your personal settings and restore the factory display to see whether there is adequate settings: amount of rinse aid in the dishwasher or not.
Operating the product End of programme Once the washing programme is over, "Program over" will be displayed on the Display Information line. 1. Press On / Off key to turn off your machine. 2. Close the tap. 3. Unplug the machine from the socket. At the end of the programme or if no programme is started, in order to provide energy saving...
MAINTENANCE AND CLEANING Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller (A, B).
Maintenance and cleaning Ceiling Impeller Check if the holes on the top ceiling impeller (1) of your machine are clogged. If they are clogged, remove and clean. To remove them, slightly ( ) push them upwards and then ( ) turn left (A,B). To install the impeller, seat it into its slot, push slightly upwards and turn it rightwards until it is securely tightened.
TROUBLESHOOTING Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 41
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 42
Troubleshooting There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. • Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”.
Page 43
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 44
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
• Time taken off work. • Functional replacement parts to repair a product. • Damaged food, clothing or other items. • The costs of a Grundig Approved • Meals taken at restaurants or from Engineer to carry out the repair. takeaways.
• The product must be correctly installed, Does Grundig offer replacements? located and operated in accordance This is a repair-only guarantee. On with the instructions contained in the occasion, the Manufacturer may at its...
Page 47
Guarantee Will there be any charge for the repairs? It is your responsibility to provide evidence to the Engineer that your product is covered by this guarantee with a proof of purchase. The Manufacturer reserves the right to charge for the reasonable cost of any service call if: •...
Page 48
Should you experience any difficulty in obtaining service contact the Grundig Customer Helpline on Tel: 0333 207 9920 or e-mail: customerservice@support.grundig.co.uk …………………………………………………………..................
Need help?
Do you have a question about the GNF 51030 W and is the answer not in the manual?
Questions and answers