Table of Contents
Advertisement
Installation
to the drainpipe without bending it. Tightly
fix the water discharge hose to the drainpipe
in order to prevent any dislocation of the
water discharge hose during operation of
the product.
max 100 cm
min 50 cm
min 4cm
C
Drainpipe must be connected
to the foul water system and it
should not be connected to any
surface water drain.
Adjusting the feet
If the door of the product cannot be closed
properly or if the product wobbles when
you push it slightly, then you need to adjust
the feet of the product. Adjust the feet of the
product as illustrated in the relevant section.
10
/40 EN
WaterProtect+
The WaterProtect+ system protects against
water leaks that may occur at the hose inlet.
Water contact with the valve box of the
system must be avoided to prevent damage
to the electrical system. If the WaterProtect+
system is damaged, unplug the product and
call the Authorised Service Agent.
A
As the hose set contains
electrical connections and
assemblies, never shorten or
lengthen the hose with extension
hoses.
Electrical connection
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a suitable
switched and fused socket in a readily
accessible position.
If the supply cord or the mains lead is
damaged please do not replace it yourself.
The supply cord or the mains lead must be
replaced by a Authorised Service Agent or a
similarly qualified person.
DISHWASHER / USER INSTRUCTIONS
Advertisement
Table of Contents
