Oven Lamp Setting - Sharp YB-S6192AE Original Instruction

OVEN LAMP SETTING

You can check 4 kinds of oven lamp setting, and customize them.
1. ON/OFF during the Door Opening
2. ON/OFF during Cooking
3. ON/OFF at Cooking Completion
4. Brightness during Cooking
* Suppose you want to check or customize the status of all
oven lamp settings.
Procedure
1 Set the oven L (unlocked).
Close the door.
2 Press the SET MEMORY pad.
<< ON/OFF during the Door Opening >>
3 Press the POWER
LEVEL pad repeatedly
until the desired setting
is displayed.
4 Press the SET MEMORY pad to save the
setting.
5 Press the POWER LEVEL pad within 3 seconds
to proceed to the next setting.
<< ON/OFF during Cooking >>
6 Press the POWER
LEVEL pad repeatedly
until the desired setting
is displayed.
7 Press the SET MEMORY pad to save the setting.
Display
ON = Factory Setting
OFF
ON = Factory Setting
OFF
EN-12
8 Press the POWER LEVEL pad within 3 seconds to
proceed to the next setting.
<< ON/OFF at Cooking Completion >>
9 Press the POWER
LEVEL pad repeatedly
until the desired setting is
displayed.
10 Press the SET MEMORY pad to save the setting.
11 Press the POWER LEVEL pad within 3 seconds to
proceed to the next setting.
<< Brightness during Cooking >>
12 Press the POWER
LEVEL pad repeatedly
until the desired setting
is displayed.
13 Press the SET MEMORY pad to save and exit the
setting.
NOTES :
1. To change the Program Lock Setting, see page EN-11.
2. The setting of Brightness during Cooking is invalid while you
set the oven lamp is OFF during cooking.
OFF = Factory Setting
ON (fl ashing)
Full brightness
= Factory Setting
Half brightness