Specifications - Sharp YB-S6192AE Original Instruction

SPECIFICATIONS

AC Line Voltage ................... Single phase 230-240 V, 50 Hz
Distribution line fuse/
circuit breaker ...................... 16A(time lag)
AC Power Required ............. 2.85 kW
Output Power ...................... 1800 W (IEC 60705)
Microwave Frequency ......... 2450 MHz* (Group 2 / Class B)
Sound level .......................... less than 70dB (A)
Outside Dimensions ............ 420(W) x 337(H) x 480(D) mm
Cavity Dimensions ............... 332(W) x 171.5(H) x 330(D) mm
Oven Capacity ..................... 0.7 cu.ft (19 litres)
Cooking Uniformity .............. Rotary antenna system
Weight ................................. Approx. 20kg
• As part of a policy of continuous improvement, we reserve
the right to alter design and specifi cation without notice.
NOTE: External equipotential bonding terminal
This appliance has an external equipotential bonding
terminal, and this symbol is on the back of the micro-
wave oven.
(Single)
420(W) x 674(H) x 480(D) mm
(Two ovens stacked)
* This Product fulfi ls the requirement of the European
standard EN55011. In conformity with this standard,
this product is classifi ed as group 2 class B equipment.
Group 2 means that the equipment intentionally
generates radio-frequency energy in the form of
electromagnetic radiation for heating treatment of food.
Class B equipment means that the equipment suitable
to be used in domestic establishments.
This product is designed for commercial application
only and as such it falls outside the scope of Regulation
(EC) 1275/2008 implementing EU Directive 2005/32/EC
on eco-design requirements for standby and off mode
electric power consumption. Sharp do not recommend
the product for domestic application and will not accept
any liability for such use.
EN-18