eKey home set Information Sheet page 3

Important information
The conversion is only possible for the ekey home finger scanner integra including its control panel.

It is not possible to replace the ekey finger scanner arte.
It is recommended to have the conversion carried out by specialist personnel.

In addition to the ekey home finger scanner integra, the cable transfer may also have to be removed so that you can

get to the control panel.
If the micro control panel is installed on the lock side, the complete multi-point lock must be removed and reinstalled,

which is labor-intensive and time-consuming.
There are two sets, which differ in the different adapter cables depending on the installed control panel (CP IN or CP

micro):
291021 ekey dLine fingerprint adapter set FS IN/CP IN
291022 ekey dLine fingerprint adapter set FS IN/CP micro
Therefore, it is important to know which control panel was in use.
Note: The ekey dLine control unit has only one relay. If an SE IN with two relays was installed, the scope of
functions will change.
YOUR FINGER. YOUR KEY.
3