Presence Detector - Zennio Presentia C v2 User Manual

2.2 PRESENCE DETECTOR

Presentia C v2 incorporates six independent presence detection channels, two more
for constant light control and one for occupancy detection.
Presence detection consists in sending objects to the bus whenever the
device observes a moving body (or no longer observes it) in the environment
of the room where it has been installed.
Constant light control consists in sending KNX orders to the dimmer device
that controls the in-room luminaries so the ambient light level remains
constant even if other light sources are present.
Occupancy detection is an algorithm that allows determining, through a
multiple sensor configuration, whether a particular space is under occupation
no matter if the occupant moves or not (i.e., no matter if the device is
detecting presence in the room or not).
Please refer to the specific manual "Presence Detector" available in Presentia C v2
product section at the Zennio website (www.zennio.com) for detailed information about
the functionality and the configuration of the related parameters.
http://www.zennio.com Technical Support: http://support.zennio.com
Presentia C v2
8