Subscribe to Our Youtube Channel
Related Manuals for Outsider PLATEAU 205
Summary of Contents for Outsider PLATEAU 205
- Page 1 PLATEAU TABLE ROUND #205 MOUNTING GUIDE Kigkurren 8A Islands Brygge DK-2300 Copenhagen · out-sider.dk...
- Page 2 PLATEAU TABLE ROUND Developed by out-sider in collaboration with Holscher Design 2021. 1x Table INDEX: PAGE Item list ..................02 1x Center tube 1x Disc Fixation of legs onto center tube..........03 Fixation of table onto center tube..........04 Fixation of disc .................05 Cleaning and maintenance .............06 4x Legs ITEM LIST...
- Page 3 FIXATION OF LEGS ONTO CENTER TUBE Place the center tube with the flange against the ground. Each leg is mounted with an M10x20 bolt from the inside of the center tube. Tighten the bolts firmly. Fastening of the leg. The bolt is passed through the hole from the inside.
- Page 4 FIXATION OF TABLE ONTO CENTER TUBE After the seat has been fitted, the table can be carefully laid on the center tube. The table comes with a steel frame, ready for mounting on the center tube. All 4x M10x12 bolts are loosely screwed in and retightened.
- Page 5 FIXATION OF DISC Lastly, insert the disc and fixate it through the center tube. Use M8x100, washer and nut. Insert the disc ATTENTION: M8x100 Washer M8 nut The disc fits in the milled surface. - The disc will skewed if the bolt is tightned too hard.
- Page 6 CLEANING AND MAINTENANCE Clean the laminate surface with warm water and soft sponge. NEVER use the abrasive “green” side of sponges. Use an ordinary universal cleaner. Difficult dirt must be removed with a nano sponge and water. Take a closer look at our website, or contact us for information.
Need help?
Do you have a question about the PLATEAU 205 and is the answer not in the manual?
Questions and answers