Table of Contents
Advertisement
1-3. Adjustable components (seats, mirrors, steering wheel)
Third outboard seats
STEP
1
While pressing in the screwdriver, pull up the head restraint.
STEP
2
■
Installing the head restraints
STEP
1
Align the head restraint with the installation holes.
STEP
2
Push down the head restraint to the lock position.
■
When not using the third center seat head restraint (if equipped)
CAUTION
■
Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.
●
Use the head restraints designed for each respective seat.
●
Adjust the head restraints to the correct position at all times.
●
After adjusting the head restraints, push down on them and make sure
they are locked in position.
●
Do not drive with the head restraints removed.
68
Push a flathead screwdriver into the slot.
The slot is located on the left side of the
left head restraint anchor.
ITY13C035
Open the zipper on the back of the third
seat and stow the head restraint inside.
ITY13C043
Advertisement
Table of Contents
