Table of Contents
Advertisement
STEP
4
STEP
5
STEP
6
Fully extended the shoulder belt
and then allow it to retract
slightly in order to activate the
ALR lock mode.
Lock mode allows the seat belt to
retract only.
While pushing the child restraint
system down into the seat, allow
the shoulder belt to retract until
the child restraint system is
securely in place.
After
the
retracted to a point where there is
no slack in the belt, pull the belt to
check that it cannot be extended.
Latch the hook of the top strap
onto the anchor fitting. (→P. 137)
Make sure the seat belt is tightly
secured, and that there is not
slack in the belt.
ITY17C128
1-7. Safety information
shoulder
belt
has
1
131
Advertisement
Table of Contents
