Table of Contents
Advertisement
2-1. Driving procedures
Engine (ignition) switch
Performing the following operations when carrying the electronic
key on your person starts the engine or changes "ENGINE START
STOP" switch modes.
■
Starting the engine
Check that the parking brake is set.
STEP
1
Check that the shift lever is set in "P".
STEP
2
Sit in the driver's seat and firmly depress the brake pedal.
STEP
3
The "ENGINE START STOP" switch indicator turns green.
STEP
4
Press the "ENGINE START
STOP" switch.
The engine can be started
from any "ENGINE START
STOP" switch mode.
Continue depressing the brake
pedal until the engine is com-
pletely started. The engine will
crank until it starts or for up to
30 seconds, whichever is less.
Diesel engine only:
cator turns on. The engine
begins starting after the indica-
tor light goes out.
ITY21C023
2
indi-
155
Advertisement
Table of Contents
