Table of Contents
Advertisement
Positioning the Seat
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
Figure 18
Pushing the Machine by
Hand
Important:
Always push the machine by hand. Do
not tow the machine, because damage may occur.
This machine has an electric-brake mechanism, and
to push the machine, the ignition key needs to be in
the Run position. The battery needs to be charged
and functioning for the electric brake to be disengage.
Pushing the Machine
1.
Park the machine on a level surface, and
disengage the blade-control switch.
2.
Set the parking brake, stop the engine, and wait
for all moving parts to stop before leaving the
operating position.
3.
Locate the bypass levers on the frame on both
sides of the engine.
4.
Move the bypass levers forward through the key
hole and down to lock them in place
Note:
Ensure this is done for each lever.
5.
Turn the ignition key on and disengage the
parking brake.
Note:
Do not start the machine.
Note:
The machine is now able to be pushed
by hand.
1. Bypass-lever locations
2. Lever position for
operating the machine
g027632
6.
When finished, ensure that the key has been
returned to the Stop position to avoid draining
the battery charge.
Note:
may still be engaged. If necessary, the electric brake
can be released manually; refer to
Electric Brake (page
Operating the Machine
Move the bypass levers rearward through the key hole
and down to lock them in place as shown in
Note:
(Figure
19).
22
Figure 19
3. Lever position for pushing
If the machine fails to move, the electric brake
36).
Ensure this is done for each lever.
g017303
the machine
Releasing the
Figure
19.
Advertisement
Table of Contents
