Specification; Warning Labels - Zenoah G2500 Owner's Manual

2. Specificaions
Power unit:
G2500/G2500 OPS
Displacement (cm ): ............................................. 25.4
3
Fuel: .................Mixture (Gasoline 50: Two-cycle oil 1)
(when using ZENOAH genuine oil)
Fuel tank capacity (cm
Chain oil: ................................ Motor oil SAE# 10W-30
Oil tank capacity (cm ) .......................................... 160
3
Carburetor: ....................................... Diaphragm type
ignition system: .......................................... Solid State
Spark plug: .....................................Champion RCJ-7Y
Oil feeding system: ........................ Mechanical pump
Max speed: ............................................ 12,500 (min
Idle speed: ............................................... 2,900 (min
Power: ............................. G2500 0.96/9,000 (kw/min
G2500 ops 0.88/9,000 (kw/min
Noise at Operator's ear (Racing): ..................... 102dB
G2500
Dimensions (L x W x H)(mm): ............265 x 220 x 220
Dry weight
Power unit only (kg): ............................................... 2.9
G2500 OPS (One-push-start)
Dimensions (L x W x H)(mm): ............265 x 235 x 220
Dry weight
Power unit only (kg): ............................................... 3.1
3. Warning labels on the machine
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the re-
quired location(s).
01-G2500･G2500 ops_GB_306＿四.indd 3
) ........................................ 230
3
(1) Read operator's manual be-
fore operation this machine.
(2) Wear head, eye and ear pro-
tection.
(3) Use the chain saw with two
hands.
(4) Warning! Kickback it's dan-
ger.
Cutting head:
<Sprocket bar>
Sprocket: ................................................................ 6T
Chain speed at max. power: ........................ 17.1 (m/s)
Guide bar
Type: .................................................. Sprocket nose
Size (in. (mm)): ...............................................10 (25)
Saw chain
Type: ....................................................Oregon 91PX
Pitch (in. (mm)): ..........................................3/8 (9.53)
Gauge (in. (mm)): ....................................0.05 (1.27)
) <Hard nose bar>
-1
) Sprocket: ................................................................ 8T
-1
) Chain speed at max. power: ........................ 15.2 (m/s)
-1
) Guide bar
-1
Type: ..........................ZENOAH carving (Hard nose)
Size (in. (mm)): ...............................................10 (25)
Saw chain
Type: ....................................................Oregon 25AP
Pitch (in. (mm)): ..........................................1/4 (6.35)
Gauge (in. (mm)): ....................................0.05 (1.27)
Specificatiotns are subject to change without notice.
Never remodel the product.
We won't warrant the machine, if you use the
remodeled product or you don't observe the
proper usage written in the manual.
G2500/G2500 OPS
(5) Warning/Attention.
(6) Never touch hot surface.
(7) Use appropriate protections
for foot-leg and hand-arm.
(8) This saw is for trained tree
service operators only.
GB-3
13.7.4 5:43:51 PM
G
B