Table of Contents
Advertisement
2. Specificaions
Power unit:
Displacement (cm
): ............................................. 18.3
3
Fuel: .................Mixture (Gasoline 50: Two-cycle oil 1)
(when using ZENOAH genuine oil)
Fuel tank capacity (cm
) ........................................ 170
3
Chain oil: ................................ Motor oil SAE# 10W-30
Oil tank capacity (cm
) .......................................... 160
3
Carburetor: ....................................... Diaphragm type
Ignition system: .............................................Pointless
Spark plug: ............................................. NGK CMR7A
Oil feeding system: ......Automatic pump with adjuster
Power .......................................... 0.62/9,000 (kw/min
Max speed ............................................. 12,500 (min
Idle speed ................................................ 2,900 (min
Noise at Operator's ear (Racing) ...................... 102dB
Dimensions (L x W x H) (mm): ...........270 x 205 x 190
3. Warning labels on the machine
(1) Read operator's manual be-
fore operation this machine.
(2) Wear head, eye and ear pro-
tection.
(3) Use the chain saw with two
hands.
(4) Warning! Kickback it's dan-
ger.
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the re-
quired location(s).
Dry weight
Power unit only (kg): .............................................. 2.3
Cutting head:
Sprocket (Teeth x Pitch): ................................ 8T x 1/4
Guide bar
Type: ............................Zenoah carving SPRO CKET
Size (in. (mm)): ..............................................8 (200)
Saw chain
Type: ....................................................Oregon 25AP
Pitch (in. (mm)): .........................................1/4 (6.35)
)
Gauge (in. (mm)): .....................................0.05 (1.27)
-3
)
-3
)
Specificatiotns are subject to change without notice.
-3
Never remodel the product.
We won't warrant the machine, if you use the
remodeled product or you don't observe the
proper usage written in the manual.
G2001
(5) Warning/Attention.
(6) Never touch hot surface.
(7) Use appropriate protections
for foot-leg and hand-arm.
(8) This saw is for trained tree
service operators only.
GB-3
G
B
Advertisement
Table of Contents
