Zenoah G2000T Owner's Manual
  1. Manuals
  2. Brands
  3. Zenoah Manuals
  4. Chainsaw
  5. G2000T
  6. Owner's manual

Zenoah G2000T Owner's Manual

Zenoah chain saw owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

CHAIN SAW
G2000T
OWNER'S MANUAL
G2000T
848C0593A0 (704)
GB-1
G
G
B
B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G2000T and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Zenoah G2000T

Summary of Contents for Zenoah G2000T

  • Page 1 CHAIN SAW G2000T 848C0593A0 (704) OWNER’S MANUAL G2000T GB-1...

  • Page 2: Table Of Contents

    G2000T EXPLANATION OF SYMBOLS AND SAFETY WARNINGS Read operator's instruction book before operating this machine. Read, understand and follow all warnings. Contents 1. For Safe Operation ... 4 2. Explanation of Symbols on the Machine ... 8 3. Installing Guide Bar and Saw Chain ... 9 4.

  • Page 3: For Safe Operation

    Use a firm grip with thumb and fingers encircling the chain saw handles. G2000T 10. Keep all parts of your body away from the saw chain when the engine is run- ning.

  • Page 4: Kickback Safety Precautions For Chain Saw Users

    G2000T 20. Operate the chain saw only in well ventilated areas. Never start or run the engine inside a closed room or building. Exhaust fumes contain dan- gerous carbon monoxide. 21. Do not operate the chain saw in a tree unless specially trained to do so.

  • Page 5: Working With Tree Service Chain-Saws From A Rope And Harness

    G2000T GB-5...
  • Page 6 G2000T Gaining a good footing at the working position can be assisted by use of a temporary foot stirrup created from an endless sling. Starting the saw in the tree When starting the saw in the tree, the operator should: a) apply the chain brake before starting;...

  • Page 7: Explanation Of Symbols On The Machine

    Position: Front of the chain cover If you turn the rod by screwdriver follow the arrow to the "MAX" position, the chain oil flow more, and if you turn to the "MIN" position, less. Position: Top of the power unit G2000T GB-7...

  • Page 8: Installing Guide Bar And Saw Chain

    G2000T 3. Installing Guide Bar and Saw Chain A standard saw unit package contains the items as illustrated. Bar protector Guide bar Saw chain Open the box and install the guide bar and the saw chain on the power unit as follows: WARNING The saw chain has very sharp edges.

  • Page 9: Fuel And Chain Oil

    • The Zenoah engines are lubricated by oil specially formulated for air-cooled 2-cycle gasoline engine use. If Zenoah oil is not available, use an anti-oxidant added quality oil expressly labeled for air-cooled 2-cycle engine use (JASO FC GRADE OIL or ISO EGC GRADE).

  • Page 10: Operating The Engine

    G2000T 5. Operating the Engine WARNING It is very dangerous to run a chainsaw that mounts broken parts or lacks any parts. Before starting engine, make sure that all the parts including bar and chain are installed properly. STARTING THE ENGINE Normal start 1.

  • Page 11: Chain Brake

    • When the saw chain is caught in the cut, do not attempt to pull it out by force, but use a wedge or a lever to open the way. GUARD AGAINST KICKBACK G2000T GB-11...

  • Page 12: Felling A Tree

    G2000T • This saw is equipped with a chain brake that will stop the chain. You must check the chain brake opera- tion before each usage by running the saw at full the throttle for I -2 sec- onds and pushing the front hand guard forward.

  • Page 13: Maintenance

    IMPORTANT When installing the cylinder cover, make sure that switch wires and grommets are positioned correctly in place. Oil filter CMR7A Spark plug tightening torgue 7.8~10.8N.m. inlet port of the cooling air G2000T GB-13...

  • Page 14: Maintenance Of Saw Chain And Guide Bar

    Such a bar needs to be corrected or replaced. Ruler No gap Chain tilts WARNING: This saw is equipped with one of the following low kick- back bar/chain combinations: Saw Model Bar Size Guide Bar G2000T 2983-52111 Zenoah Part Number Saw Chain 2981-52210...

  • Page 15: Troubleshooting Guide

    11. Specifications Power unit: Displacement (cm ): ... 18.3 Fuel: ... Mixture (Gasoline 50 : Two-cycle oil 1) (when using ZENOAH genuine oil) Fuel tank capacity (cm ): ... 170 Chain oil: ... Motor oil SAE# 10W-30 Oil tank capacity (cm ): ...

  • Page 16: Limited Warranty

    30 days if used for rental purpose) from the date of initial purchase. THE PURCHASER SHALL BEAR COSTS OF TRANS- PORTING THE UNIT TO AND FROM THE ZENOAH DEALER. THE PURCHASER SHALL NOT BE CHARGED FOR DI- AGNOSTIC LABOR WHICH LEADS TO THE DETERMI-...

Table of Contents

Save PDF