Table of Contents
Advertisement
2. Specificaions
Power unit:
Displacement (cm
): ............................................. 40.1
3
Fuel: ................................................................ Mixture
When using market oil (JASO FB grade oil or ISO-L-
EGB grade oil) ..........................GASOLINE 25: OIL 1
When using ZENOAH genuine oil, JASO FD grade oil
or ISO-L-EGD grade oil.............GASOLINE 50: OIL 1
Fuel tank capacity (ml): ......................................... 310
Chain oil: ................................ Motor oil SAE# 10W-30
Oil tank capacity (ml): ............................................ 210
Carburetor: ...................Diaphragm type (Walbro WT)
Ignition system: ....................................Pointless (TCI)
Spark plug: ....................................Champion RCJ-7Y
Oil feeding system: ......Automatic pump with adjuster
Power: ........................................ 1.96/10500 (kw/min
Max speed: ............................................ 12,500 (min
Idle speed: ............................................... 2,900 (min
Noise at Operator's ear (Racing): ..................... 103dB
Sprocket (Teeth x Pitch):
for 95VPX .......................................7T x 0.325" (8.26)
Dimensions (L x W x H)(mm): ............370 x 235 x 270
Dry weight (Power unit only) (kg):
G4101 ................................................................... 4.2
3. Warning labels on the machine
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the re-
quired location(s).
01-G4101_GB_306＿三.indd 3
(1) Read operator's manual be-
fore operation this machine.
(2) Wear head, eye and ear pro-
tection.
(3) Use the chain saw with two
hands.
Cutting head:
Guide bar
Type: .................................................. Sprocket nose
Size mm (in.): ................................................400 (16)
Saw chain: Oregon 95VPX
Pitch mm (in.): ........................................8.26 (0.325)
Gauge mm (in.): .......................................1.27 (0.05)
Specificatiotns are subject to change without notice.
)
-1
)
-1
)
-1
Never remodel the product.
We won't warrant the machine, if you use the
remodeled product or you don't observe the
proper usage written in the manual.
G4101
(4) Warning! Kickback it's dan-
ger.
(5) Warning/Attention.
(6) Never touch hot surface.
GB-3
13.6.25 5:29:07 PM
G
B
Advertisement
Table of Contents
