Specification; Warning Labels On The Machine - Zenoah G4501 Owner's Manual

2. Specificaions
Power unit:
Displacement (cm ):
3
G4501 ................................................................. 45.0
G5201/G5201P ................................................... 49.3
Fuel: .................Mixture (Gasoline 50: Two-cycle oil 1)
(when using ZENOAH genuine oil)
Fuel tank capacity (cm
Chain oil: ................................ Motor oil SAE# 10W-30
Oil tank capacity (cm
) .......................................... 260
3
Carburetor: ...................Diaphragm type (Walbro WT)
ignition system: ................................... Pointless (CDI)
Spark plug:
G4501 ................................................... NGK BPM7A
G5201/G5201P ......................................NGK BPM8Y
Oil feeding system: ......Automatic pump with adjuster
Sprocket (Teeth x Pitch): ............................ 7T x 0.325
Dimensions (L x W x H)(mm):
G4501/G5201 ...................................420 x 235 x 270
G5201P .............................................420 x 245 x 270
Dry weight
Power unit only (kg):
G4501 ................................................................... 4.8
G5201 ................................................................... 4.9
G5201P ................................................................. 5.0

3. Warning labels on the machine

If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the re-
quired location(s).
01-G4501･5201･5201P_GB_306＿四.indd 3
) ........................................ 550
3
(1) Read operator's manual be-
fore operation this machine.
(2) Wear head, eye and ear pro-
tection.
(3) Use the chain saw with two
hands.
(4) Warning! Kickback it's dan-
ger.
Cutting head:
Guide bar
Type: ................................Hard nose, Sprocket nose
Size (in. (mm)): .............................................18 (450)
Saw chain
Type: ....................................................Oregon 21BP
Pitch (in. (mm)): ......................................0.325 (8.26)
Gauge (in. (mm)): ..................................0.058 (1.27)
Power (kw/min
)
-1
G4501 ......................................................... 2.1/9,000
G5201 ....................................................... 2.7/10,000
G5201P ..................................................... 2.6/10,000
Max speed (min )
-1
G4501 ............................................................. 13,500
G5201 ............................................................. 14,500
G5201P ........................................................... 14,000
Idle speed (min )
-1
G4501 ............................................................... 2,500
G5201 ............................................................... 2,500
G5201P ............................................................. 2,500
Noise at Operator's ear (Racing)
G4501.....105dB (A)
G5201.....107dB (A)
G5201P...107dB (A)
Specificatiotns are subject to change without notice.
(5) Warning/Attention.
(6) Never touch hot surface.
(7) Use appropriate protections
for foot-leg and hand-arm.
(8) This saw is for trained tree
service operators only.
Never remodel the product.
We won't warrant the machine, if you use the
remodeled product or you don't observe the
proper usage written in the manual.
G4501/G5201/G5201P
G
B
GB-3
13.6.20 11:29:33 AM