Safety - Husqvarna 120iBV Operator's Manual

Double insulation.
Manufacturer
Husqvarna AB
Drottninggatan 2, SE-561 82 Huskvarna
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the operator's manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
of damage to the product and/or the
attachment, other materials or the adjacent
area if the instructions in the manual are not
obeyed.
Note:
Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING:
instructions that follow before you use the
product.
• Read the instructions carefully to know the controls
and the correct operation of the machine. Incorrect
or careless use of the product can turn it into a
dangerous tool that can cause serious or even fatal
injury to the operator or others.
• Under no circumstances may the design of the
product be modified without the permission of the
manufacturer. Never use a product that has been
modified in any way from its original specification
and always use original accessories. Non-authorized
modifications and/or accessories can result in
serious personal injury or the death of the operator
or others. Your warranty may not cover damage
or liability caused by the use of non-authorized
accessories or replacement parts.
4
Used if there is a risk of
Used if there is a risk
Read the warning
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

• This product produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical
implants to consult their physician and the medical
implant manufacturer before operating this product.
• Remove the battery from the product during
charging.
General power tool safety warnings
Check before starting
• Inspect the working area. Remove all loose objects,
such as stones, broken glass, nails, steel wire, string
etc. that could be thrown out.
• Always remove the battery to prevent the machine
being started by accident. Always disconnect the
battery before any maintenance on the machine.
• Before using the machine and after any impact,
check for signs of wear or damage and repair as
necessary.
• Only use original spare parts.
• The machine operator must ensure that no people or
animals come closer than 15 metres while working.
When several operators are working in the same
area the safety distance should be at least 15
metres.
• Do an overall inspection of the machine before use,
see maintenance schedule.
• National or local regulations may regulate the use.
Comply to given regulations.
Personal safety
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result
in serious personal injury.
• Keep bystanders away.
2034 - 002 - 17.01.2023