Safety - Husqvarna 360BT Operator's Manual

Use approved hearing protection
and approved eye protection. If the
environment contains dust, use a
breathing mask.
Use approved protective gloves.
Mixture of gasoline and two-stroke oil.
Air purge bulb.
Keep all body parts away from hot
surfaces.
Choke, open position.
Choke, closed position.
This product complies with applicable
EC Directives.
This product conforms to applicable UK
regulations.
Noise emission to the environment
label as per EU and UK directives
and regulations, and New South
Wales legislation "Protection of
the Environment Operations (Noise
Control) Regulation 2017". The
Safety definitions
The definitions below give the level of severity for
each signal word.
WARNING:
CAUTION:
4

Safety

Injury to persons.
Damage to the product.
guaranteed sound power level of the
product is specified in
on page 16 and on the label.
yyyywwxxxxx
Note:
Other symbols/decals on the product refer
to certification requirements for other commercial
areas.
Euro V Emissions
WARNING:
engine voids the EU type-approval of
this product.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not
from the manufacturer or not approved by the
manufacturer.
• the product is not repaired at an approved
service center or by an approved authority.
Note:
This information makes the product easier
to use.
General safety instructions
WARNING:
instructions that follow before you use
the product.
• Do not do changes to the product without
approval from the manufacturer and always
Technical data
Look out for thrown objects.
Thrown objects can cause
serious injury. Use personal
protective equipment.
Keep a safety distance at a
minimum of 15 m to persons
or animals.
The rating plate shows the
serial number. yyyy is the
production year and ww is
the production week.
Tampering with the
Read the warning
1967 - 001 - 20.01.2023