Operation - Husqvarna 120iBV Operator's Manual

To assemble the collection bag
Note:
If the collection bag is not assembled correctly,
a safety switch will stop the product start procedure.
WARNING:
attaching or removing the bag.
1. Remove the blower tube if it is installed to the
product.
2. Push the collection bag (A) onto the vacuum outlet
(B). The interlock (C) engages when you hear a
click.
E
D
3. Connect the collection bag strap (D) with the retainer
(E).
4. Connect the shoulder strap (F) with the retainer (G).
Introduction
WARNING:
safety chapter before you use the product.
10
Stop the machine before
B
A
C
F
G
Read and understand the
5. Make sure that the collection bag is fully closed.
To install the battery charger on the
wall
CAUTION:
screwdriver to install the battery charger to
the wall. An electric screwdriver can cause
damage to the battery charger.
1. Install the battery charger on the wall with the 2
screws (A). Use wall plugs (B) if it is necessary.
A
A
2. Install the 2 screw hole plugs (C).
3. Connect the power cord (D) to the battery charger
and a mains socket.

Operation

To do a function check before you use
the product
1. Do a check of the air inlet for dirt and cracks. Use
a brush and clean off grass and leaves from the
product.
2. Make sure that the product works correctly.
3. Do a check of all nuts and screws and make sure
that they are tight.
Do not use an electric
D
2034 - 002 - 17.01.2023
B
C