Safety - Husqvarna 345BT Operator's Manual

(Fig. 12) Choke, open position.
(Fig. 13) Choke, closed position.
(Fig. 14) Idle adjustment screw.
(Fig. 15) This product complies with applicable EC
Directives.
(Fig. 16) This product conforms to the applicable
UK regulations.
(Fig. 17) Noise emissions to the environment
according to European Directive
2000/14/EC and New South Wales
legislation "Protection of the Environment
Operations (Noise Control) Regulation
2017". Noise emission data can be found
on the machine label and in the Technical
data chapter.
(Fig. 18)
Safety definitions
The definitions below give the level of severity for each
signal word.
WARNING:
CAUTION:
Note:
This information makes the product easier to
use.
General safety instructions
WARNING:
instructions that follow before you use the
product.
• Do not do changes to the product without approval
from the manufacturer and always use original
accessories. Modifications and/or accessories that
are not approved can result in serious injury or the
death of the operator or others.
1854 - 002 - 29.03.2022
Look out for thrown ob-
jects. Thrown objects can
cause serious injury. Use
personal protective equip-
ment.
Injury to persons.
Damage to the product.
Read the warning
(Fig. 19)
yyyywwxxxxx
Note:
Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

• Do not use a damaged product. Do the safety
checks and maintenance given in this operator's
manual. All other maintenance must be done by
approved servicing personnel.
• All servicing and repair operations must be done by
approved servicing personnel. If a part of the product
is defective, speak to your servicing dealer.
Vibration safety
This product is for occasional operation only.
Continuous or regular operation of the product can
cause "white finger" or equivalent medical problems
from vibrations. Examine the condition of your hands
and fingers if you operate the product continuously or
regularly. If your hands or fingers have discoloration,
have pain, tingle, or are numb, stop work and speak to a
physician immediately.
Safety instructions for operation
WARNING:
instructions that follow before you use the
product.
• This product can be dangerous and cause serious
injury or death to the operator or others. Be careful
and use the product correctly.
• Do an inspection of the product before use. Refer to
Maintenance on page 12 .
Keep a safety distance at
a minimum of 15 m to per-
sons or animals.
The rating plate or the la-
ser printing shows the seri-
al number. yyyy is the pro-
duction year and ww is the
production week.
Read the warning
7