Table of Contents
Advertisement
Setting the Print Conditions
2 2 2 2 2 Image type
64
Working with the Printer Driver
Frequency
You can select the frequency of dots per inch (25.4 mm). You can select the
value from 38 to 200. The default value is 71.
Angle
You can select the angle of dot direction so as to make adjustments against
moire or other problems. You can select the value from 0 to 90. The default
value is 45.
Select the type of photo and set image finishing.
Standard
Clicking [Details] enables settings to be made for brightness and contrast.
Portrait
Use this setting for pictures of one or two individuals from the bust up. This
type of image processing is particularly good for printing photos of faces.
Group
This setting is for group photos that are over-exposed. This process is effective
for restoring facial features that have become washed out by a flash.
When either [Portrait] or [Group] is selected, the settings made for [Stan-
dard] are returned to their defaults.
Photo Image Adjustment
Clicking [Details] opens the [Photo Image Adjustment] dialog box.
Brightness
: The brightness of photo images can be adjusted
Contrast
: The contrast of the overall image can be adjusted to
Backlight correction : When a check mark is placed in the check box, back
Edge enhancement : When a check mark is placed in the check box, edge
Tone smoothing
: This setting is available when [Screen-covered] is
to 7 levels.
7 levels.
light correction is applied to the image to make it
sharper.
enhancement is applied to the image to accent con
tours.
selected for [Photo]. When a check mark is placed
in the check box, the tonal expressions used in
screen-covered processing are smooth.
Advertisement
Table of Contents
