Table of Contents
Advertisement
Unexpected Action ___________________________
Problem
Your RISO printer repeats the master-
making process for each copy of the
identical page.
Your RISO printer does not operate
as specified in the [Sorter control]
option in the Printer Driver.
Your RISO printer cannot print at the
speed specified in the [Printspeed]
option in the Printer Driver.
Original data cannot be output to the
USB Flash Drive.
(EZ5 series)
102
Appendix
Cause / Condition and Action
❑ The [Collate] check box is selected in the [Print] dialog box in
the application software.
Cancel the current print job on your computer and turn
Action
off the main power switch of your RISO printer. After
approximately 10 seconds, turn it on again. Always
cancel the [Collate Copies] or [Collate] option in the
[Print] dialog box when starting a print job.
❑ The finishing job specified in the [Sorter control] option is not
available for the current combination of your RISO printer
and an optional sorter.
Refer to the dedicated user's guides of your RISO
Action
printer and the optional sorter.
❑ The print speed remains constant when a certain mode is
selected in the [Sorter control] option in the Printer Driver, for
your RISO printer which is equipped with a certain type of
optional sorter.
Refer to the corresponding page for detailed descrip-
Action
tion about the [Sorter control] option.
(Page
66)
❑ Are you using the Printer Driver for USB Flash Drive?
There are two types of Printer Drivers. To output to a USB
Flash Drive, install the USB flash-via-Printer Driver. Data
cannot be output to a USB Flash Drive using an ordinary
Printer Driver.
(Page
❑ Are you using a USB Flash Drive formatted for RISO fold-
ers?
Create a folder just for RISO files in the USB Flash Drive.
(Page
42)
36)
Advertisement
Table of Contents
