Table of Contents
Advertisement
Sending and Printing Data
52
Working with the Printer Driver
Check print conditions.
• Specify the number of copies to be printed within the following
range : 1 to 9,999.
• Never fail to deselect the [Collate] box. If it is selected, the master-
making operation will be repeated for every copy.
The displayed items in the [Print] dialog box vary depending on the application
software.
IMPORTANT!
If you want to print a file consisting of several pages, and the file include dif-
ferent paper sizes or page directions, printing may fail when you choose [All]
for the paper range. Specify page numbers to print for those of same page size
or direction.
If you want to set additional print conditions for the current print job ;
Open the [Properties] dialog box by clicking [Properties] in the [Print] dialog
box.
Some printer settings are not available depending on access privi-
leges.
[Guide] Tab (refer to
page 55
Remove the check mark for
[Collate].
for detailed settings)
IMPORTANT!
Settings of paper size and page direction
for this tab should be identical with those
in the application software to be used.
Advertisement
Table of Contents
