Table of Contents
Advertisement
Setting the Print Conditions
1 1 1 1 1 Color
2 2 2 2 2 Original
56
Working with the Printer Driver
This option is not available for KZ.
Print color
When color information is acquired by executing [Refresh], the color that
has been set in the printer is automatically set, and the character of the color
name is displayed in blue. This operation is convenient for checking what
colored drum is currently set.
When the information has not been acquired, display the drop-down list by
clicking [M], and manually select the color that has been set for the printer.
[Refresh] (Only in the case of network connection)
I It is necessary to set [Color information] - [Reference] on the [Con-
figuration] tab
(Page
When [Refresh] is clicked, the color information that has been set to the printer
is reflected on the Printer Driver. When the information is acquired, the char-
acter of the color name of the Printer Driver is displayed in blue.
IMPORTANT!
To appropriately update the ink color, the RISO Network Card monitoring tool
needs to be started in advance.
Size
You can specify a desired paper size in either "Standard" or "Custom" box as
a frequently-used one. The factory-set paper size is "Standard: Letter 8.5 ×
11 inch" or "A4 210 × 297mm".
– Changing the standard paper size setting
When using any other standard size of paper than the displayed one, click
[M] to display a list of paper sizes and select a desired one by highlighting it.
IMPORTANT!
When paper is fed with the long edge first, select the paper size whose name
contains the word "-R".
Be sure to specify the same page direction which was set in the application
software used when creating the document data.
– Changing the custom paper size setting
When using any other custom-size paper than the displayed one, select
[custom] and enter its width and length in the boxes. If desired to change the
unit of length from "inch" to "mm", click [M] next to the same box and high-
light [mm].
• The range of paper size you can specify here depends on the specifica-
tions of your RISO printer.
• You can name custom-size paper and register it in the list of standard
paper sizes. See "Registering Custom Paper Size as Standard" on
47
for the registration procedure.
• In some application software, inputs in [Custom] column might be ignored.
In such a case, register the non-standard size paper. (See
46).
page
page
47)
Advertisement
Table of Contents
