Table of Contents
Advertisement
Setting the Print Conditions
60
Working with the Printer Driver
Destination
(For the Printer Driver)
I The [Destination] is displayed only when your RISO printer is equipped
with the storage memory (DM-128CF).
When you install the Printer Driver, open the [Properties] dialog box, and
you can select the storage memory to be installed or not installed from the
[Configuration] tab. (See
Click [M] to view the drop-down list and select the destination.
Print Only
Send the data to your RISO printer, and start printing in the auto process.
Stored data will be automatically erased after the print job is done.
Print & Storage*
The print job is processed and the data is stored in the printer. You can
reactivate the stored data on your RISO printer at anytime you like.
Storage Only*
Send the data to your RISO printer to be stored. You can reactivate the stored
data on your RISO printer at anytime you like.
* This option is not available for EZ3/EZ2/KZ series.
(For the USB flash-via-Printer Driver )
Only for EZ5 series
Click [M] to open the drop-down list, and set the destination.
USB print (Manual)
Data is output to the USB Flash Drive. A folder for storing the data in the
USB Flash Drive data can be
USB print(Auto process)
Data is sent to the USB Flash Drive. It is printed according to the [Process]
setting. (A folder for storing the data in the USB Flash Drive cannot be se-
lected. Data is stored in the [Auto process] folder.)
After a master-making, the data in the USB Flash Drive is automatically
deleted.
page
46)
selected.(Page
61)
Advertisement
Table of Contents
