Table of Contents
Advertisement
Setting the Print Conditions
5 5 5 5 5 Output
58
Working with the Printer Driver
Margin-plus
If you select this check box, printing will be done in a 95% scaling.
180-degree rotation
You can rotate print images by 180 degrees by activating this option. Select
the check box to activate it.
IMPORTANT!
This option is also available on the control panel of your RISO printer. Make
sure it is not activated on both sides at the same time. If it is, this option will be
canceled.
Number of Copies
You can use this field to specify the number of copies if no field is prepared
for print quantity entry in your application software. When the number of
copies can be specified in the [Print] dialog box of the application software,
on the other hand, you can ignore this setting because it has no effect on
printing operation.
Program printing
This option is not available for EZ3/EZ2/KZ series.
Printing jobs are conducted in sets of copies. One set should contain at least
one page. By selecting program printing, you can click [Settings]. Click [Setting]
to open [Program printing] dialog box.
Copies
: Enter the value for number of pages per set to be printed.
Sets
: Enter the value for number of sets to be printed.
Reset
: Returns Copies and Sets to their defaults.
Job Separation : When the Tape is selected, the tape is inserted into each
group. (Optional job separator should be mounted on
your RISO printer.)
Advertisement
Table of Contents
