Table of Contents
Advertisement
3 3 3 3 3 Paper
4 4 4 4 4 Layout
Orientation
You are required to select the same page direction as of original document
data here. The factory-set page direction is "Portrait".
When paper is fed with the wide edge first, however, the page direction speci-
fied here should be opposite to that of original document data, i.e. "Portrait"
to "Landscape" and "Landscape" to "Portrait".
IMPORTANT!
Be sure to specify the same page direction which was set in the application
software used when creating the document data.
Output size
Select the paper size for printing.
If you do not use scaling, select [Same as original].
If you select paper size different from the original text, scaling will be done
from 50% to 200%.
Page layout
You can print the data of two or more pages on one sheet of paper.
Standard
: No Multi-up (single) or (plural) printing is conducted.
Multi-up (Single) : Print two or four copies of a single document on one
sheet of paper.
Multi-up (Plural)
: Print two or four different text pages on one sheet of
paper.
Multi-Up (Single)
A A
A
A A
Page order
Set the order of the original. You can select when conducting multi-up printing.
2 in 1: Select from Ascending/Descending.
4 in 1: Select from Horizontal-Ascending/Vertical-Ascending/Horizontal-
Descending/Vertical-Descending.
Setting the Print Conditions
Multi-Up (Plural)
D
C
A B
B
A
C D
Working with the Printer Driver
57
Advertisement
Table of Contents
