Table of Contents
Advertisement
Quick Links
INSTALLATION &
OPERATION MANUAL
BCA1550MW
AC SOURCE
BATTERY CHARGER
An ISO9001:2015 Registered Company
101-8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA)
Battery Chargers
•
Inverters
www.analyticsystems.com
•
Power Supplies
•
Voltage Converters
Advertisement
Table of Contents
Related Manuals for Analytic Systems BCA1550MW
Summary of Contents for Analytic Systems BCA1550MW
- Page 1 INSTALLATION & OPERATION MANUAL BCA1550MW AC SOURCE BATTERY CHARGER An ISO9001:2015 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters 101-8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA) www.analyticsystems.com...
- Page 2 Copyright (2005-2023) Analytic Systems Ware (1993) Ltd. Revised -Jan 31, 2023...
- Page 3 AC SOURCE BATTERY CHARGER IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for the battery charger. BATTERY CHARGER PRECAUTIONS 1. Do not expose the battery charger to rain or snow unless it is a sealed model. 2.
- Page 4 Analytic Systems does not recommend the use of any of its products in direct patient care. Examples of devices considered to be life support devices are neonatal oxygen...
-
Page 5: Table Of Contents
• Introduction • Main Parts/Box Contents • Operation • Operational Indicators • Charging Profiles • Installation • Battery Temperature Sensor • Equalize Cycle • Troubleshooting • Specifications • Warranty Copyright (2005-2022) Analytic Systems Ware (1993) Ltd. Revised - Nov 10,2022... -
Page 6: Introduction
The box you have received should contain the following: • One BCA1550MW AC Battery Charger • One Battery Temperature Sensor • This Manual • One Warranty Card If anything is missing or damaged please contact your dealer or Analytic Systems for a replacement... - Page 7 Main Parts FRONT PANEL Battery Temp. Sensor Connection: Stage Select Switch PT07A8-4S MIL-Spec Connector Power Switch DC Output Connection: MS3102E22- AC Input Connection: 22S circular MIL-Spec Connector D38999/20WC4PN MIL-Spec Connector Output Voltage Adjust Equalize Cycle Start Button Indicator LEDs...
-
Page 8: Operation
Operation This unit is designed for simple and intuitive operation. Before operating, make sure this unit is properly installed and connected. See Installation for more information. TO CHARGE A BATTERY Check that the Battery Reversed B1 and B2 LEDs are OFF. If either are glowing, check the battery connection to insure it is in the correct polarity. -
Page 9: Operational Indicators
Operational Indicators This unit features several indicator LEDs on its front panel to display the unit’s operating condition. The meanings of these LEDs are detailed below. For more information on the LEDs relating to alarm conditions, see Troubleshooting. EQUALIZE THIS FUNCTION REQUIRES THE BATTERY TEMP. SENSOR INSTALLED This LED glows red when the unit is performing an Equalize cycle. -
Page 10: Charging Profiles
Charging Profiles This unit has both two-stage and three-stage charging capability. You can choose which type of charging is used during operation by using the Stage Select switch located on the front panel. Below are explanations of the two charging profiles: TWO-STAGE CHARGING The battery is charged at constant current until the battery’s voltage... -
Page 11: Installation
Installation MOUNTING All 1050 and 1550 units weigh approxi- mately 20lbs (9.1 kg) and can be safely mounted on either a horizontal or vertical surface. Mount vented chassis units in a dry and well ventilated location at least 1 inch (2.54 cm) surrounding clearance. - Page 12 AC Input Connection CAUTION: CHARGER MUST BE OFF TO CONNECT OR DISCONNECT POWER! The AC Input connection is intended for connection to the AC power source that is powering the battery charger. All 1050 and 1550 units feature Power Factor Correction technology on the input and can operate from any AC input voltage from 85-264 VAC.
- Page 13 DC Output Connection CAUTION: CHARGER MUST BE OFF TO CONNECT OR DISCONNECT BATTERIES! The DC Output Connection is intended for connection to the batteries being charged. To ensure normal operation, the total average load should not exceed the unit’s output amps rating. Some units may require wiring to this connection.
-
Page 14: Battery Temperature Sensor
BATTERY TEMPERATURE SENSOR CONNECTION This unit is equipped with an Amphenol MIL-Spec PT02A8-4S connector to connect to up to two Analytic Systems waterproof battery temperature sensors. This connection’s pinout can be found on the unit label. TO INSTALL THE SENSOR AT THE BATTERY: •... -
Page 15: Equalize Cycle
TO PERFORM AN EQUALIZE CYCLE: Connect and install the supplied Analytic Systems Battery Temperature Sensor. See Installation for more information. Push the Equalize Button on the front panel. On some units, this button is recessed to prevent accidental operation;... -
Page 16: Troubleshooting
Troubleshooting This unit is fitted with LED indicators and an alarm buzzer to display and diagnose any problems in operation. In the event of a malfunction, the unit will sound the buzzer to alert you prior to shutting itself down. You should immediately check which LEDs are glowing to determine the cause of the alarm. -
Page 17: Specifications
Specifications INPUT Actual Voltage 85 - 264 VAC Maximum Amps 16 A (@100 VAC In) Circuit Breaker 25 Amp Magnetic Breaker Input Frequency 45 - 65 Hz Noise on Input < 50 mV Peak to Peak Power Factor 0.99 @ 50/60 Hz OUTPUT Volts Nominal 24 VDC... -
Page 18: Warranty
Designed to meet CSA 22.2.107.1 & UL458 Warranty Two Years Parts and Labor * Specifications subjects to change without notice. Designed and manufactured by: ANALYTIC SYSTEMS WARE (1993) LTD. 101-8128 River Way p. 604.946.9981 f. 604.946.9983 Delta, BC V4G 1K5 Canada tf. - Page 19 Analytic Systems supports the high-quality products with the following limited product warranty: 1. The equipment manufactured by Analytic Systems Ware (1993) Ltd. (the “Warrantor”) is warranted to be free from defects in workmanship and materials under normal use and service.
- Page 20 DESIGNED AND MANUFACTURED BY 800-668-3884 604-946-9983 sales@analyticsystems.com www.AnalyticSystems.com Battery Chargers • Inverters • Power Supplies • Voltage Converters 101-8128 River Way Delta, BC V4G 1K5 | Canada Register Products Online | www.analyticsystems.com/support/warranty-registration...
Need help?
Do you have a question about the BCA1550MW and is the answer not in the manual?
Questions and answers