Tools/Additional Items Required - enphase IQ System Controller 3 Quick Install Manual

Tools/additional
items required
S . N O I T E M N A M E
1 CT-200-CLAMP
2 EP200G-HNDL-R1 (lifting handle)
3 Breakers, different ratings
4 Conduits (with fittings and fitting tools)
5 Drill
6 5/32" pilot bit
7 Screwdriver
8 Wrench
9 Adjustable wrench
10 Torque wrench
11 Level
12 5/32" Allen key
13 Conductor stripper
14 Electrician's hole saw (2") or punch set
15 Stud finder (if required)
16 Conduit ground hub rings
#10,1/4" or 5/16" lag bolts or screw 3" long (depending
17
on attaching wall) for each wall-mount bracket
18 Control wire
* Enphase SKU for control cable: CTRL-SC3-NA-01
IQ System Controller 3/3G Quick Install Guide
Q U A N T I T Y S O U R C E
3 IQ Combiner/Enphase Store
1 Enphase Store
4 Enphase Store/retail outlets
As required Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
As required Provided by installer
As required Distribution/Enphase Store*
11