Tools/Additional Items Required - enphase IQ System Controller 2 Quick Install Manual

Tools/additional
items required
S . N O I T E M N A M E
1 CT-200-SPLIT
2 EP200G-HNDL-R1 (lifting handle)
3 Breakers, different ratings
4 Conduits (with fittings and fitting tools)
5 Drill
6 5/32" pilot bit
7 Screwdriver
8 Wrench
9 Adjustable wrench
10 Torque wrench
11 Level
12 5/32" Allen key
13 Conductor stripper
14 Electrician's hole saw (2") or punch set
15 Stud finder (if required)
16 Conduit ground hub rings
#10, 1/4" or 5/16" lag bolts or screw 3" long (depending
17
on attaching wall) - for each wall-mount bracket
*2 Eaton BR240B, 1 Eaton BR260, and 3 Eaton BR220 included with EP200G-SC2-RSD-BRK-KIT.
IQ System Controller 2 Quick Install Guide
Q U A N T I T Y S O U R C E
2 IQ Combiner/Enphase Store
1 Enphase Store
4 Enphase Store/retail outlets *
As required Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
3 Provided by installer
8