Table of Contents
Advertisement
Fasep 2000 srl
Videotronic V548.G4: User's Manual
7.3
Input of Rim Dimensions (ALU-SE)
Fig. 58
Fig. 59
7.4
Detecting and correcting umbalance
7.4.1
After setting wheel dimensions, press <START> or close the safety cover to spin the wheel and start the measurement
run.
!
CAUTION:
7.4.2
At the end of the spin the wheel will brake automatically and the display will show the weight position and weight
requirement to correct the wheel's umbalance.
7.4.3
Apply the weights (fig.59, fig.60). If umbalance shown is 0, press <FINE> to show residual umbalance.
Fig. 60
MAIN MENU > INPUT > ALU MODE
Press ALU MODE untill the required position of weight is on the video (fig.57).
Insert the distance (IN1).
Insert the distance (IN2).
Press ALU MODE untill the required position of weight is on the video (fig.58).
Insert the distance (IN1).
Insert the distance (IN2).
wheel start automatically when safety cover is closed, if present.
Fig. 61
14
Rev. 1.6
15 April 2019
Advertisement
Table of Contents
