How To Apply The Weight Using Alu-Se Applicator; How To Use Split Program - Fasep VIDEOTRONIC V548.G4 User Manual

Fasep 2000 srl
Videotronic V548.G4: User's Manual
7.5

How to apply the weight using ALU-SE applicator

Fig. 62
7.6

How to use SPLIT Program

After the measurement spin
Press <SPLIT> to select the program.
Turn the wheel until first spoke (green position) is at 12 0' clock.
Press <SET/OK> to confirm.
Turn the wheel until second spoke (red position) is at 12 o' clock
Press <SET/OK> to confirm the red position.
Balance the wheel applying weight on green and red positions.
Place the weight as in the picture 62.
Turn the wheel until reach the application
position of the weight (fig. 61).
Move the rod until reach the application
position of the weight.
Apply the weight(fig. 63).
Repeat the procedure for the other side.
.
15
15 April 2019
Fig. 63
Fig. 64
Rev. 1.6