Removing The Snack Tray; Removing The Safewash® Seat Insert (Select Models); Removing The Canopy - Britax Brook User Manual

Removing the Snack Tray

1. Press the buttons underneath
the snack tray at the same time.
NOTE: Make sure to empty the
snack tray.
2. Pull the snack tray away from
the stroller.
Removing the SafeWash®
Seat Insert (Select Models)
1. Release the harness by pressing
the button in the center of the
buckle while pulling the two
tongues away from the buckle
assembly.
2. Pinch the waist strap tongues
while you separate them from
the shoulder strap.
14
1
2
1
2
3. Pull out the waist straps and
buckle from the seat insert slots.
4. Remove seat insert from stroller.
5. Reconnect the shoulder strap
retainers with the waist strap
tongues. See page 21.

Removing the Canopy

1. Unwrap the hook and loops on
each side of the canopy.
2. Push the canopy forward and
untuck the rear part of the
canopy from the back of the
seat.
3. Push the tab on the outside
of the canopy stay with a
screwdriver and pull away
from stroller. Repeat on the
other side.
3
1
2
3
15