Installing The Safewash® Seat Insert (Select Models); Installing The Snack Tray - Britax Brook User Manual

3. Extend the canopy forward and
lift the rear of the canopy and
tuck around the seat recline
handle and the back of the
stroller.
4. Wrap the hook and loops
around the toddler seat frame
on each side..
Installing the SafeWash®
Seat Insert (Select Models)
1. Release the harness by pressing
the button in the center of the
buckle while pulling the two
tongues away from the buckle
assembly.
2. Pinch the waist strap tongues
while you separate them from
the shoulder strap.
10
3
4
1
2
3. Place seat insert on the seat
aligning its openings with the
respective straps.
4. Route the waist straps and the
buckle through the seat insert
slots.
5. Pull the shoulder straps in front
of the insert and align the waist
strap tongues with the shoulder
strap retainers and slide through
until they click locking into place.

Installing the Snack Tray

1. Slide the pins into the child
accessory mounts on the seat
until they lock into place.
NOTE: Keep hands and fingers
away from the child accessory
mounts when installing.
3
4
5
1
11