Table of Contents
Advertisement
28
ENGINE OPERATION
ENOW00064-0
Engine may be hot immediately after operat-
ing and could cause burns if touched. Allow
engine to cool down before attempting to
carry the outboard.
7
1. Cooling water check port
ENOM00042-B
Emergency starting
ENOW00099-A
When the emergency starter rope is used for
starting engine;
Start in gear protection does not work. Be
sure to shift is at neutral position. Other-
wise the engine will move the boat imme-
diately and cause personal injury.
Be careful that your clothes or other
items do not get caught in the rotating
engine parts.
To prevent accident and injury by rotating
parts, do not re-attach flywheel cover
and the top cowl after the engine has
been started.
Do not pull starter rope if any bystander is
b e h i n d . T h e a c t i o n c a n i n j u r e t h e
bystander.
CAUTION
1
ENOF00223-2
WARNING
Attach engine stop switch lanyard to
clothing or any par t of body like arm
before starting engine.
1. Remove the top cowl.
1
1. Cowl latch
2. Loosen the three bolts (A, B, C) fas-
tening the tank. (Don't remove the
tank fastening bolts.)
3. Remove the three bolts (D, E, F) fas-
tening the recoil starter.
D
ENOF00217-1
A
B
C
ENOF00218-0
E
F
ENOF00219-0
Advertisement
Table of Contents
