TOHATSU MFS 3.5C Owner's Manual page 17

ENOM00019-A
ECI (Emission Control Information) label locations
1
2
34
5
67
89
0q
w
1 EMISSION CONTROL INFORMATION
2 THIS ENGINE CONFORMS TO (MODEL YEAR) CALIFORNIA
AND U.S. EPA EMISSION REGULATION FOR SPARK IGNITION
MARINE ENGINES.
3 THIS EQUIPMENT MEETS U.S. EPA EVAP STANDARD.
4 REFER TO THE OWNER'S MANUAL FOR
MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
5 THIS ENGINE IS CERTIFIED TO OPERATE ON GASOLINE.
6 DISPLACEMENT
7 FAMILY NAME
8 MAXIMUM POWER
9 OUTPUT
0 TRADE MARK AND NAME OF MANUFACTURER
q PART No.
w MODEL YEAR AND MONTH
EPA Emissions Regulations
Outboards sold by Tohatsu America Cor-
poration in the United States are certi-
fied to the United States Environmental
Protection Agency as conforming to the
requirements of the regulations for the
control of air pollution from new out-
board engines. This certification is con-
tingent on certain adjustments being set
to factory standards. For this reason, the
factory procedure for servicing the prod-
uct must be strictly followed and, wher-
ever practicable, returned to the original
intent of the design.
Maintenance, replacement, or repair of
the emission control devices and sys-
tems may be performed by any marine
engine repair establishment or individ-
ual.
The Emission Control Information label
was affixed to engines as permanent evi-
dence of EPA certification.
Emissions Warranty Coverage
WARRANTY INFORMATION
Four Stroke Outboard Limited Warranty
Canadian and California residents who
have purchased an outboard motor from
a Canadian and California dealer receive
additional warranty coverage for specific
emissions related components. To fully
understand your warranty coverage
please read our standard warranty state-
ment and the Emission Warranty State-
ment provided by your dealer.
LABEL LOCATIONS
ENOF01606-A
17
4