Rangemaster Classic 60 Induction User Manual page 32

If there is an error, an error code will be shown on the heater displays.
Code Description
• Cooling Fan is disabled. Call an authorised service agent.
E1
E3 • Supply voltage is other than the rated values.
• Switch the hob off ,wait until "H" disappears for all zones, switch the hob on and continue to use. If the same
error is displayed again, call an authorised service agent.
• Supply frequency is different from the rated values. Switch the hob off by pressing , wait until "H" disappears
E4
from all zones, switch the hob on by pressing and continue to use. If the same error is displayed again,
switch the plug for the appliance off and on. Switch the hob on by pressing and continue to use. If the same
error is displayed again, call an authorised service agent.
• Internal temperature of the hob is too high, switch the hob off by pressing and let the heaters cool down.
E5
E6 • Communication error between the touch control and heater. Call an authorised service agent.
• Coil temperature sensor is disabled. Call an authorized service agent.
E7
E8 • Cooler temperature sensor is disabled. Call an authorised service agent.
• Large Coil Saturation Error. Switch the hob off by pressing on/off button, switch the hob on by pressing on/
EA
off button and continue to use. If the same error is displayed again, call an authorised service agent.
• Supply Voltage Error.Switch the hob off by pressing on/off button, switch the hob on by pressing on/off
EC
button and continue to use. If the same error is displayed again, call an authorised service agent.
C1-C8 • Mcroprocessor alert. Switch the hob off by pressing on/off button, switch the hob on by pressing on/off
button and continue to use. If the same error is displayed again, call an authorised service agent.
28