Intended use f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your STANLEY SDH550 impact drill has been designed protected supply. for drilling in wood, metal, plastics, and masonry as well Use of an RCD reduces the risk of electric shock.
♦ If the supply cord is damaged, it must be replaced by ♦ Avoid touching the tip of a drill bit just after drilling, as it the manufacturer or an authorised STANLEY Service may be hot. Centre in order to avoid a hazard.
ENGLISH (Original instructions) Using an extension cable ♦ To select reverse rotation, push the forward/reverse button (3) to the right. Warning! Never change the ♦ Always use an approved extension cable suitable for direction of rotation while the motor is running. the power input of this tool (see technical data).
STANLEY catalogue or contact your local ♦ Product specifications may differ by country. STANLEY office at the address indicated in this manual. A ♦ Complete product range may not be available in all list of authorised STANLEY repair agents and full details countries.
Page 8
N a m e s & A d d r e s s e s f o r S T A N L E Y S e r v i c e C o n c e s s i o n a r i e s - I N D I A ASSAM: Arun Machine And Tools, A.T.Road, Near Rupshree Cinema, Tokobari, Guwahati, Assam, Pin: 781001, Mob: 9435118754, Tel: 2591868.
Need help?
Do you have a question about the SDH550 and is the answer not in the manual?
Questions and answers