Table of Contents
Advertisement
Operating a Camera Using the RM-IP10 IP Remote Controller
This system allows you:
To perform pan/tilt and zoom operations using the joystick of the IP remote controller, and to perform the Preset
operation using the button.
System configuration
Operating Multiple Camera Using Multiple RM-IP10 IP Remote Controllers
System configuration
• You can operate up to 112 cameras using five IP remote controllers.
• The joystick of the IP remote controller allows comfortable pan/tilt and zoom operations.
System configuration
Computer for setting
Note
You cannot use the RS-232 connection when using the LAN connection.
You cannot control the camera from computer via USB when using the LAN connection.
Only one camera at a time can be displayed on the computer.
The specified frame rate may not be output when communicating via the USB hub.
RM-IP10 IP Remote Controller
Switching hub
RM-IP10 IP Remote Controller
System Configuration
Computer
RM-IP10 IP Remote Controller
Video signal
Remote Control (VISCA or LAN) signal
Signal flow
Computer
USB Hub
Video signal
Remote control (LAN) signal
Signal flow
,
Advertisement
Table of Contents
