Table of Contents
Advertisement
Step 3.
Remove six screws.
Figure 31. Remove six screws
Screw specifications
M2.5 × L6
Step 4.
Rotate the LCD module to an angle of more than 90 degrees and remove the LCD module.
Figure 32. Remove the LCD module
Go to
https://support.lenovo.com/partslookup
replacement part:
LCD module
Remove the upper case (with keyboard)
Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 26
"Remove the battery pack (for gaming models)" on page 26
"Remove the solid-state drive" on page 27
"Remove the Wi-Fi card" on page 28
"Remove the I/O board" on page 28
"Remove the I/O board cable" on page 29
"Remove the I/O board FCC (40 pin)" on page 29
"Remove I/O board FCC (10 pin)" on page 30
"Remove the heat sink" on page 30
"Remove the fan" on page 30
"Remove the touchpad cable" on page 31
"Remove the system board (for gaming models)" on page 31
"Remove the LCD module" on page 32
Go to
https://support.lenovo.com/partslookup
replacement part:
Upper case (with keyboard)
Remove the hinge cover
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module" on page 32
Step 1.
Remove the hinge cover.
Figure 33. Remove the hinge cover
Go to
https://support.lenovo.com/partslookup
replacement part:
Number of screws
6
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
33
Advertisement
Table of Contents
